Waterjet Cutting Limestone

The TexRocks.com Gallery

(Click Any Picture to Enlarge)

If you want to see how we make our Texas Popouts with a waterjet cutter, here are the photos. Cutting the Familiar Alamo Shape into a Rattlesnake Limestone.
start on left first stairstep begin circle finish circle
right side top removed all done for comarison: the original
Cutting a Slab 5.25 inches thick.
Carving Big Bend
Spraying to Del Rio		 Note El Paso
at bottom left		 Just about done
Inches to go
Less than an inch		 Now we are
Back to Starting point
when it doesn't go through last cut finishing up almost done
Back to Top
  Copyright - © 2005 TexRocks.com - All rights reserved.